Semi-Auto Rubber PowEPTProduction Line, Used Tire Recycling EPT

I. Function
one. Squander tire recycling system is employed to shred squander tire into rubber powder.
2. Approach Circulation:
Squander tire–Ring cutter –Strips cutter–Rim cutter –Crushing EPT–Completed merchandise
3. Processing Technique:
Physic mechanical crushing approach at standard temperature of squander tire, no chemical raw material is required, no waste fuel, squander h2o and soot are discharged, and the cooling h2o of the equipment is reused, no emission, products noise is inside of the assortment specified by the nation(GB20055-2006), fineness of rubber powEPTproduced by it is adjustable(ten to thirty meshes). The process is as follows: Breaking down, crushing, filtering, magnetic separating, grinding and then be completed.

II. Complex Parameter of Every EPT
1. Ring cutter:
It will different the sidewall from the best of tire’s relationship, so that tire sidewall and the top are totally divided.
2. Strips cutter:
It will lower sidewall into wide of strips is 3-five cm, and tire circle reserved.
three. Rim cutter:
It will minimize the 3-5cm strips into three.5cm tire block.
four. Steel wire separator
It will independent the metal and rubber from tire circle mouth parts.
five. Linear vibrating screen: It will classify the rubber powEPTfor initial time
Conveyor EPT: Use to transport not up necessary dimensions re-back again to tire shredEPTEPT
Magnetic method: It can classify slim steel from rubber powder
PowEPTscreen: Second time to classify rubber powder
6. Tire shredder
It will lower 3.5cm block into 10-thirty mesh measurement rubber powder.
Our EPT can deal with .sixty five-one.4m tires, and the EPT line want three-4 employees to function.
The space need is at the very least 15m size *8m width *6m height.
The EPT can make the powEPTinto ten -thirty mesh.

We have 3 varieties of Model XKP400/450/560.
XKP400 150kg for each hour
XKP450 300kg per hour
XKP560 500kg for each hour

III. Some creation method particulars:
1. This Tyre Recycling EPT incXiHu (West Lake) Dis.Hu (West Lake) Dis. principal EPT and accessorial tools, it is utilized for recycling scrap-tire (steel tyre and textile tyre), the last product is rubber powEPTor reclaimed rubber
2. The magnet separator and granulator grinEPTis optional.
3. The investment on this generation line is small and the footprint is modest. It is easy to run, only need 5 employees.
four. Analysis for output
(1) XKP400 rubber crusher:
Output: 5000-6500kg/24 hour for about 28 mesh granule.
(two) XKP450 rubber crusher:
Output: 8000-9500kg/24 hour for about 28 mesh granule.
(three) XKP560 rubber crusher:
Output: 11000-13500kg/24 hour for about 28 mesh granule.
five. You don`t want the Granulator GrinEPTif your last rubber powEPTis significantly less than thirty mesh. But we need it if the powEPTbigger than 30 mesh and the number of this EPT rely on the output.

Our company generates a entire established of squander tyre recycling EPT, which is utilised to make rubber powEPTfrom previous tyre, like rail tyre, engmeenng tyre and other old tires. It can generate twenty – eighty mesh rubber powder.

III. Picture demonstrate