Semi-Automatic Tyre Recycling Plant, Semi-Car Rubber PowEPTMaking Line

I. Feature
1. Squander tire recycling technique is utilized to shred waste tire into rubber powder.
2. Method Stream:
Waste tire–Ring cutter –Strips cutter–Rim cutter –Crushing EPT–Completed merchandise
3. Processing Strategy:
Physic mechanical crushing method at normal temperature of waste tire, no chemical raw substance is essential, no waste gas, waste h2o and soot are discharged, and the cooling drinking water of the tools is reused, no emission, products sounds is inside the range specified by the place(GB20055-2006), fineness of rubber powEPTproduced by it is adjustable(ten to 30 meshes). The approach is as follows: Breaking down, crushing, filtering, magnetic separating, grinding and then be completed.

II. Technological Parameter of Each EPT
one. Ring cutter:
It will independent the sidewall from the top of tire’s relationship, so that tire sidewall and the top are fully divided.
2. Strips cutter:
It will lower sidewall into extensive of strips is three-5 cm, and tire circle reserved.
three. Rim cutter:
It will lower the three-5cm strips into three.5cm tire block.
4. Metal wire separator
It will separate the steel and rubber from tire circle mouth components.
5. Linear vibrating monitor: It will classify the rubber powEPTfor very first time
Conveyor EPT: Use to transport not up essential measurement re-back to tire shredEPTEPT
Magnetic program: It can classify slender steel from rubber powder
PowEPTscreen: Next time to classify rubber powder
6. Tire shredder
It will minimize 3.5cm block into ten-thirty mesh dimensions rubber powder.
Our EPT can deal with .sixty five-1.4m tires, and the EPT line need 3-4 staff to run.
The space prerequisite is at the very least 15m duration *8m width *6m peak.
The EPT can make the powEPTinto ten -30 mesh.

We have three types of Model XKP400/450/560.
XKP400 150kg for every hour
XKP450 300kg for every hour
XKP560 500kg for every hour

III. Some production method specifics:
1. This Tyre Recycling EPT incXiHu (West Lake) Dis.Hu (West Lake) Dis. primary EPT and accessorial tools, it is utilised for recycling scrap-tire (steel tyre and textile tyre), the ultimate item is rubber powEPTor reclaimed rubber
two. The magnet separator and granulator grinEPTis optional.
3. The investment on this manufacturing line is tiny and the footprint is small. It is effortless to run, only need five personnel.
4. Evaluation for output
(one) XKP400 rubber crusher:
Output: 5000-6500kg/24 hour for about 28 mesh granule.
(two) XKP450 rubber crusher:
Output: 8000-9500kg/24 hour for about 28 mesh granule.
(3) XKP560 rubber crusher:
Output: 11000-13500kg/24 hour for about 28 mesh granule.
five. You don`t need the Granulator GrinEPTif your ultimate rubber powEPTis less than thirty mesh. But we require it if the powEPTbigger than thirty mesh and the variety of this EPT rely on the output.

Our business generates a entire established of waste tyre recycling EPT, which is used to make rubber powEPTfrom aged tyre, like rail tyre, engmeenng tyre and other old tires. It can generate 20 – 80 mesh rubber powder.

III. Photo display