tyre | ZPS-900 | ZPS-1200 |
dimensions of tyre | le 900 mm | le 1200 mm |
dimensions of crumbs | le 50*fifty mm | le fifty*fifty mm |
EPT of major motor EPT | 45 kw ( 2sets) | 75 kw ( two sets) |
discharge motor EPT | 2.2 kw | 2.2 kw |
display motor EPT | ||
enter conveyor motor EPT | one.5 kw | 1.five kw |
capicity | 1000-1500 kg/ | 1500-2000 kg/ |
rotating velocity of principal aXiHu (West Lake) Dis.s | twenty r/min | 16 r/min |
rotating velocity of monitor | 6 r/min | 6 r/min |
mumber of knifes | eighteen pcs | 24 pcs |
knife substance | higher-strength alloy metal | high-toughness alloy metal |
Dia of major aXiHu (West Lake) Dis.s | 128 mm | 238 mm |
push manner | double travel | double push |
1. This EPT tire shredEPTcan lower EPT tire into 50x50mm, and 60x60mm rubber block as you require.
2. The oversize sorts can be minimize to little pieces by EPT tire cutter.
Working approach of the EPT creation line:
Squander tire – Tire de beader- EPT tire reducing – tire shreddering – Rubber crushing – Rubber powder
Initial step: Tire de bearder, it is used to pull the steel wire out of tire
Next action ( optional): It is employed when tire size is more substantial than 850mm
Third step: Tire shredder
1. This EPT tire shredEPTcan cut EPT tire into 50x50mm, and 60x60mm rubber block as you need to have.
two. The oversize varieties can be lower to small pieces by EPT tire cutter.
Fourth stage: Rubber crusheris used to grind the chunks into scaled-down mesh powEPTthrough the vibrating monitor as youneed.
Fifth phase: Magetic separator is used to separate the metal from the pwoder.
Fiber separator(optional): It is used to different nylon or fiber from the powder.
End item: Rubber powEPT( we can produce the powEPTmesh we need to have)