Rubber Mulch EPT Rubber Granulator Tyre Crumb EPT
The EPT tire recycling EPT will be managed by the PLC, all the resources will be process inside of of EPTs, there is Real ZERO Pollution. one labor, one engineer can work all the EPTs, no need to have to work the EPTs, just handle the PLC. the EPTs can defend the EPTs, perform the EPTs and maintain the EPTs function smoothly.
Specification
one.Tire shredEPTEPT
The Rubber ShredEPTEPT adopt PLC automatic manage method, with computerized reversal manage program in overload problem. Two-shaft tire crusher is EPTly developed for previous tires with lower pace and higher torque to decrease sounds and EPT usage.
The blade of the shredEPTis created of higher quality steel and subjected to Bodycote heat therapy to obtain the very best crushing performance.The shredEPTis easy to disassemble and modify cutter blade and ideal for tearing big, further thick and difficult components.The thickness assortment of the crushing blade is 25mm-152mm according to the tire type,output and last item. The grinEPTcan method OTR tires,large truck tires,automobile tires and so on at the velocity of one-30tons whithin 1 hour.
| Product | Enter dimensions | Output size | Cappacity | Motor | Blades amount | Proportions | Bodyweight |
| TS-800 | 800mm | fifty*50mm | 1-2T/h | two*22kw | 16pcs | four*two.6*three.2m | 8T |
| TS-1200 | 1200mm | 60*60mm | 3-5T/h | 2*37kw | 20pcs | four.8*2.8*3.5m | 14T |
| TS-1600 | 1600mm | 50-150mm | six-8T/h | 2*45kw | 16-30pcs | 5*2*three.4m | 18T |
| TS-1800 | 1800mm | fifty-150mm | 7-10T/h | two*55kw | 20-24pcs | 5.six*two*3.4m | 23T |
| TS-2000 | 2000mm | seventy five-200mm | ten-15T/h | two*75kw | twenty-30pcs | 6*two.four*4m | 36T |
| TS-2400 | 2400mm | a hundred-200mm | twenty-30T/h | 2*110kw | sixteen-24pcs | 7.four*3.two*five.2m | 56T |
two.Rasper
EPT tire shredding system is designed to produce up to six tons for every hour of wire free rubber mulch.This method creates up to a 99% wire totally free chip ranging in dimension between 12-25mm based on the desired size.Soon after processing,the metal is taken out by our magnetic separation method.At this position,the wire cost-free rubber chips are ready to be colored and employed for landscaping mulch and the steel is prepared to be baled and marketed to smelters.
| Rasper | Motor | EPT | Potential | Proportions | Fat | Reducing chamber | Closing product |
| R45 | Siemens | 45KW | three hundred-500kg/H | one.4*1.two*2.3m | 1700kg | 450*600mm | ten-30mm |
| R55 | Siemens | 55KW | 500-700kg/H | one.seven*1.seven*2.3m | 1850kg | 450*800mm | ten-30mm |
| R75 | Siemens | 75KW | 700-1T/H | two*2*four.1m | 3500kg | 550*800mm | 10-30mm |
| R90 | Siemens | 90KW | one-one.5T/H | 2.1*2.1*4.1m | 4200kg | 550*1000mm | ten-30mm |
| R132 | Siemens | 132KW | 1.5-3T/H | 2*2.5*four.1m | 6100kg | 742*1200mm | 10-30mm |
| R315 | Siemens | 315KW | three-6T/H | six.2*2.1*3.6m | 12400kg | 697*1562mm | 10-30mm |
three.Granulator EPT
Waste Tire Recycling Rubber Granule Producing EPT is adopting physical recycling approach and is designed to grind the rubber mulch from the rasper into modest granules as wonderful as one-6mm. The granules are screened and re-circulated until finally the preferred dimension is attained. This Entirely-Computerized Tyre Recycling Line running in typical temperature, no need to add any other chemicals, no pollution to the surroundings. This is the very best way to recycling scrap tires.
| Granulator | G37 | G45 | G90 |
| Motor | Siemens | Siemens | Siemens |
| EPT | 37kw | 45kw | 90kw |
| Potential | three hundred-500kg/h | five hundred-800kg/h | 800-1500kg/h |
| Dimensions | 1.eight*1.six*2.4m | one.8*1.nine*two.4m | two.two*2.3*3m |
| Ultimate solution | 1-6mm | 1-6mm | one-6mm |
four.Miller
Rubber powEPTis the last result of ambient tire recycling.At this stage,crumb rubber is ground down into a clean powEPTform with practically all steel and fiber taken off.Rubber powEPThas several secondary employs from injection molding goods,coatings,roofing supplies and various asphaltapplications.
Rubber powEPTis usually located in forty-74 microns(.40-.74mm) in dimension.This micron dimension metarial has the edge of becoming incorporated into new or eXiHu (West Lake) Dis.sting formulations for a variety of polymers and completed goods.
| Rubber powder | M2000 | M1500 | M1000 | M500 |
| Input solution | Weighty responsibility truck tyres to bicycle tyres | |||
| Input size | Diameter 1800mm | Diameter 1800mm | Diameter 1800mm | Diameter 1800mm |
| Output dimensions | shred to thirty-a hundred and twenty mesh rubber powder | |||
| Ability | 2000kg/h | 1500kg/h | 1000kg/h | 500kg/h |
| Whole Kw | 680-760kw | 516-556kw | 347-372kw | a hundred and seventy-190kw |
FAQ:
Q1,Are you a manufacturing unit or a investing business?
A. We are a producer with thirty many years generation encounter in tire recycling EPT. We have export license, we can supply you the manufacturing unit rates.
Q2. Can you guarantee the ability as you described ?
A. Undoubtedly yes,apart from that,we also supply three-5years warranty.
Q3, are you positive the closing rubber powEPTcan be completely cleanse out of wire steel or nylon ?
A. The closing powEPTpurity can achieve ninety nine.9%. we have magnetic separator which can independent the wire metal from the rubber powder.
