Sticky Sublimation Coating Powder
Sticky sublimation coating powEPTis exclusively designed and deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ed for the elastic material transfer printing, to prevent the overlap of the sample, deformation and other concerns of elastic fabric in the approach of transfer, resulting in a extremely lower pass price of transfer printing.
Attribute:
1 In the course of the transferring, the sticky coating powEPTcould be able to adhere the cloth and paper, but there is no glue residue on the material following stripping
2 The stickiness of the cloth and paper can be altered by the producer of the transfer paper unEPTthe advice of our firm and the viscosity is far more steady, which can be stored for a EPT time.

Large Focus Sublimation Coating Powder
For the existing high-velocity coating EPTs, our firm independently deveXiHu (West Lake) Dis.Hu (West Lake) Dis.s a reliable content of more than 30% of the coating chemical – large focus coating powder. On the foundation of no growing in charges, the coating pace could be substantially enhanced, and generation capability will be doubled than the rapidly-dry coating powders.
Characteristic:

For high-velocity coating EPT production, coating manufacturer ought to have a experienced coating technological innovation.

Rapidly-dry Sublimation Coating Powder
The formulation of the 1st generation of EPT sublimation transfer paper coating is widely utilised in the market, but progressively it are unable to be matched with the necessity of substantial-speed printer owing to the high expense, low production effectiveness and slow drying of printing coating.
Attribute:
Nano-induced secondary self-assembly techniques of this coating substance, are drastically improved in the following facets:

one The all round price of this rapidly-dry combined powEPTis diminished while the usability of the powEPTremains unchanged

2 This quickly-working day coating powEPTcan increase the efficiency of coating manufacturing, and the production velocity can be promoted by a lot more than 25%.

three Because of to purposeful advancement, the printing drying rate of this product has been enhanced more than 1 time, and it can savelarge sum of electric EPT from the baking lamp.

How to use our coating powEPT:

1. Adding proportional water into stirring tank, keep water temperature as identical as place temperature.
2. Set EPT bag coating powEPTslowly into agitator even though stirring, and keep stirring till the chemical powEPTdissolving uniformly into water, no lump on the area of liquid. The dissolution time is dependent on the strategy of agitator.
3. EPTking some samples of performing checks right after dissolving, and get notes of glue temperature and corresponding viscosity, make sure the qualified screening result before filtration.
4. Two times of filtration before coating on EPT with 800-100mesh filter
5. The liquid glue continue to be on EPT is recyclable whilst coating. It must be by means of filter display screen once again and can be utilised in miXiHu (West Lake) Dis.ng with refreshing liquid coating chemical substances.

JoinGoal EPT Substance(HangZhou) Co., LTD

TEL :86~13 0571 88828 138581177787 62890542
FAX: 86~571-8822571/8822 0571 -67913566
Web site: http://en.be a part of-purpose.com